Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

ATEN VK224: 4-Port Serial Expansion Box

USD$350.00 USD$315.00
(You save USD$35.00)

ATEN VK224: 4-Port Serial Expansion Box

USD$350.00 USD$315.00
(You save USD$35.00)
Calculated at checkout

Product Description

The ATEN VK224 4-Port Serial Expansion Box provides four additional bi-directional RS-232 / 422 / 485 serial ports for a flexible expansion of the ATEN Control System. This allows users to control additional serial devices in an environment where more serial devices are required. With the advantage of an Ethernet-based connection, the expansion box can be easily connected to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

Package Contents:

  • 1x VK224 4-Port Serial Expansion Box
  • 1x Power Adapter
  • 1x Mounting Kit
  • 1x User Instructions

  • Provides 4 bi-directional RS-232/422/485 serial ports to expand the ATEN Control System
  • Up to 8 expansion boxes can be added to a single VK2100 Control Box
  • Flexible Deployment: Connects to a VK2100 Control Box via an Ethernet connection
  • ID Switch pairs the VK224 with a controller to instantly configure the network settings
  • Dual Power Supply: DC or Power over Ethernet (PoE)
  • Firmware upgradable through USB or Web interface

Serial • 4 x Programmable Bi-directional RS-232/422/485 Port 
(4 x DB9 Male Connector, configurable via pin assignments); 
 – Baud Rate: 300 to 115200 (default: 9600); 
 – Data Bit: 8 (default) or 7; 
 – Stop Bit: 1 (default) or 2; 
 – Parity: None (default), Even or Odd; 
 – Flow Control: None (default) RTS/CTS

Pin2: RX Pin 1:RX- Pin3:D+
Pin3: TX Pin 2: RX+ Pin 4:D-
Pin 5: GND Pin 3: TX+  
Pin 7: RTS Pin 4: TX-  
Pin 8: CTS Pin 5: GND  
Ethernet • 1 x RJ-45 Female, 10/100Base-T 
• Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH 
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: 
Subnet Mask:
Controller ID 1 x 16-segment Switch
Expander ID 1 x 8-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
USB 1 x USB Type A
Consumption 5V 1.2A
Operating Temperature 0 – 50°C
Storage Temperature –20 – 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.45 kg ( 0.99 lb )
Dimensions (L x W x H) 13.00 x 7.60 x 4.20 cm 
(5.12 x 2.99 x 1.65 in.)
  • * The specification and pictures are subject to change without notice.
  • * All trademarks and logos are the properties of their respective holders.

Product Reviews

Find Similar Products by Category

Related Products