The ATEN VE892 is an Optical HDMI Extender that overcomes the length restriction of standard HDMI cables by using optical fiber to send high definition audio and video signals over large distances.
The VE892 accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.125 Gbps optical link (for resolutions up to 1080p@60Hz at 24-bits)
The VE892 can also extend the IR remote control and transfer RS-232 (up to 115kbps) in both directions, allows you to connect serial devices such as touch screens and barcode scanners.
|
     
Package Contents:
- 1x VE892T
- 1x VE892R
- 1x IR Transmitter
- 1x IR Receiver
- 1x Mounting Kit
- 2x Power Adapters
- 1x User Instructions
|
Features:
- Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable
- Very long distance transmission – up to 20km
- HDMI (3D, Deep Color), HDCP compatible – signaling rates up to 3.125 Gbits
- Superior video quality – up to 1080p@60Hz
- Supports full frequency IR signal from 30KHz to 60KHz
(The IR receiver cable included with the package only supports 30 KHz to 56 KHz)
- Uses one fiber optic cable to connect the local and remote units
- Supports wide screen formats
- Built-in 8KV/15KV ESD protection
- Features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc.
- Supports bi-directional IR signal transmission, one way at a time
- Rack-mountable
- Hot-pluggable
|
Diagram:
 |
Specifications:
| Function |
VE892R |
VE892T |
| Video Input |
| Interfaces |
N/A |
1 x HDMI Type A Female (Black) |
| Impedance |
N/A |
100 Ώ |
| Max. Distance |
N/A |
1.8 m |
| Video Output |
| Interfaces |
1 x HDMI Type A Female (Black) |
N/A |
| Impedance |
100 Ώ |
N/A |
| Video |
| Max. Data Rate |
6.75 Gbps (2.25 Gbps Per Lane) |
6.75 Gbps (2.25 Gbps Per Lane) |
| Max. Pixel Clock |
225 MHz |
225 MHz |
| Compliance |
HDMI (3D, Deep Color)
HDCP Compatible |
HDMI (3D, Deep Color)
HDCP Compatible |
| Max. Resolutions / Distance |
Up to 1080p@20km |
Up to 1080p@20km |
| Audio |
| Input |
N/A |
1 x HDMI Type A Female (Black) |
| Output |
1 x HDMI Type A Female (Black) |
N/A |
| Control |
| RS-232 |
Connector: 1 x Terminal Block, 3 pole
Channel Bypass |
Connector: 1 x Terminal Block, 3 pole
Channel Bypass |
| IR |
1 x Mini Stereo Jack Female (Black);
30~60 KHz full range transmission |
1 x Mini Stereo Jack Female (Black);
30~60 KHz full range transmission |
| Power |
| Connectors |
1 x DC Jack |
1 x DC Jack |
| Consumption |
5.3 VDC, 5.1W |
5.3 VDC, 5.1W |
| Environmental |
| Operating Temperature |
0-50°C |
0-50°C |
| Storage Temperature |
-20 - 60°C |
-20 - 60°C |
| Humidity |
0 - 80% RH, Non-Condensing |
0 - 80% RH, Non-Condensing |
| Physical Properties |
| Housing |
Metal |
Metal |
| Weight |
0.44 kg ( 0.97 lb ) |
0.44 kg ( 0.97 lb ) |
| Dimensions (L x W x H) |
14.17 x 10.30 x 3.00 cm
(5.58 x 4.06 x 1.18 in.) |
14.17 x 10.30 x 3.00 cm
(5.58 x 4.06 x 1.18 in.) |
| Carton Lot |
5 pcs |
5 pcs |
| Note |
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fi ber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fi ber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifi cations. |
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fi ber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fi ber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifi cations. |
- * The specification and pictures are subject to change without notice.
- * All trademarks and logos are the properties of their respective holders.
|
Loading... Please wait... 
