The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners. * The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details. * In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator. Patent No. CN ZL 200610135911.0 , US 7752339 , US 7585176 , TW I339467 Package Contents 1x CE790T Digital KVM Extender (Transmitter) 1x CE790R Digital KVM Extender (Receiver) 1x USB KVM Cable (CE790T) 2x Power Adapters 2x Rack Mount Kits 2x Grounding Wires 1x User Manual 1x Quick Start Guide

Features: Remotely access computers on your KVM installation via intranet Dual console operation - control your system from both the transmitter and receiver USB consoles OSD (On Screen Display) on both the transmitter and receiver units Supports GUI operation* No software required - an HTTP server is embedded in both units Built-in ASIC for greater reliability and compatibility USB Keyboard and USB Mouse Ports RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners Audio enabled USB overcurrent detection and prevention High resolution video - up to 1920 x 1080 Supports widescreen formats Ultra-High quality video mode Hot pluggable Rack mountable Firmware upgradable Auto-MDIX - automatically detects cable type Note: * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com). ** RS-232 serial ports support Tx/Rx/CTS/RTS signals only.

Diagram:

Specifications: Function CE790T CE790R Connectors Console Ports Keyboard 1 x USB Type A Female (White) Video 1 x HDB-15 Female (Blue) Mouse 1 x USB Type A Female (White) Speaker 1 x Mini Stereo Jack Female (Green) Mic. 1 x Mini Stereo Jack Female (Pink) KVM Ports Keyboard/ Video / Mouse 1 x SPHD-17 Female(Yellow) N/A Speaker 1 x Mini Stereo Jack(Green) Mic. 1 x Mini Stereo Jack (Pink) RS-232 1 x DB-9 Female (Black) 1 x DB-9 Male (Black) Power 1 x DC Jack (Black) LAN 1 x RJ-45 Female (Black) Pushbuttons OSD 1 x Pushbutton Select 1 x Pushbutton LEDs Status 1 (Green / Orange) Power 1 (Green / Red) Emulation Keyboard / Mouse USB Power Consumption DC5.3V/6.62W DC5.3V/6.36W Video Up to 1920 x 1080 Environment Operating Temp. 0 - 50°C Storage Temp. -20 - 60°C Humidity 0-80% RH, Non-condensing Physical Properties Housing Metal Weight 0.50 kg 0.48 kg Dimensions (L x W x H) 20.00 x 8.00 x 2.50 cm * The specification and pictures are subject to change without notice. * All trademarks and logos are the properties of their respective holders.

Try these related products:
ATEN CE790T: Digital KVM Extender CE790 Transmitter Unit
ATEN CE790R: Digital KVM Extender CE790 Receiver Unit

E-mail a friend about this item.