Altusen's PN0108 is equipped with eight hotpluggable ports for easy server rooom management. Each port can be individually controlled so that users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order. On/Off scheduling allows for preset start/shutdowns/restarts on a daily, weekly,monthly basis.The PN0108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.* 　 Package Contents 1x 8-Port Power Over the NET™ 1x AC Source Power Cord 8x Power Outlet Power Cords 8x Safe Shutdown Cables 1x PON Cable (DB9 F to DB9 M) 1x User Manual 1x Quick start guide 1x Mounting Kit :Rack mounting brackets and hardware 4x foot pads 1x Software CD

Features: Remote power on / off / reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power Over the NET™) port Local power on / off / reboot control via the PN0108's PON port to the computer's RS-232 port Daisy chain up to 15 additional stations to control up to 128 outlets Manual switching between Local and Remote access for each port via front panel push button switches Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order Easy setup and operation via a GUI interface Provides three configuration/management methods: Browser; Telnet; or Console Terminal Safe shutdown and rebooting for Windows systems* Overcurrent protection and recovery for each AC port (110 V model only); total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface Separate circuits for the unit's power and the power to the devices - the power control status menu is still accessible even when an overcurrent condition trips the devices' circuit breaker On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times Port grouping - perform the same action on a specified group of ports LEDs for easy status monitoring Two level (Administrator and User) security Configuration can be reset Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus UL/TUV approved Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD. *Safe shutdown and rebooting is supported if the Power Monitor utility has been installed For more information about KVMs which can connect to PN0108, see Compatible KVM Table *The PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

Diagram:

Specifications: Power Inlet 1 x IEC 60320/C14 Male Power Outlets 8 x IEC 60320/C13 Female Connectors PON In 1 x DB-9 Female (Black) PON Out 1 x DB-9 Male (Black) Safe Shutdown 8 x 6-pin Safe Shutdown Jacks Female (Black) Switches Reset 1 x Semi-Recessed Pushbutton Power 1 x Rocker F/W Upgrade 1 x Slide Outlet On/Off 8 x Pushbutton Remote On/Off LEDs Outlet Power 8 (Orange) Remote Access 8 (Green) Station ID 2 x 7 segment (Orange) I/P Rating (Total input) 100 ~ 120V, 50/60Hz,12A 220 ~ 240V, 50/60Hz,10A O/P Rating Per Port 100 ~ 120V, 50/60Hz, 9A (Max.) 220 ~ 240V, 50/60Hz, 9A (Max.) Total 100 ~ 120V, 50/60Hz, 11A (Max.) 220 ~ 240V, 50/60Hz, 9A (Max.) Power Consumption No Load 120V/15W; 230V/15W Max Load 120V/1440W; 230V/2300W Environment Operating Temp. 0 ~ 40˚C Storage Temp. -20 ~ 60˚C Humidity 0 ~ 80% RH ,Non-condensing Physical Properties Housing Metal Weight 3.70 kg Dimensions ( L x W x H ) 43.24 x 20.98 x 4.40 cm(19"/1U) * The specification and pictures are subject to change without notice. * All trademarks and logos are the properties of their respective holders.

Try these related products:
ATEN Altusen PN9108: 8 ports power over the net
ATEN ALTUSEN SN0108: 8-Port Serial Over the NET
ATEN ALTUSEN SN0116: 16-Port Serial Over the NET
ATEN ALTUSEN KN9108: 8-Port KVM Over the NET
ATEN ALTUSEN KN9116: 16-Port KVM Over the NET

E-mail a friend about this item.